- CAN Bus interface for XCVario 2022 S2 interface with 1 MBit/s datarate
- Allows to use S2 RS232 serial interface to be used for alternate purpose, e.g. serial connection to OpenVario
- Robust automotive and aerospace standard bus allows cables with up to 15 meter length
- State of the art 3-axis magnet sensor
- 16-bit ADC ASIC, low-noise, high accuracy, low power consumption, offset management and temperature compensation, allows 1 ° to 2 ° compass heading accuracy
- 30 cm RJ45 cable included
- Installation: XCVario-Magnetometer-CAN-2024
NOTE: Check in advance if required gap for sensor from metal or wires (>30 cm) is possible, esp. at installation’s in Self-Launchers or Twin-Seaters this might be problematic and even not possible
Vincent Vandeweijer –
Haven’t flown it yet, just finished installing it. Was quite a hassle to get it calibrated. But as with many things, once you get the feel for it. It is quite easy. Looking forward trying it out in the air!